If you are using a WiFiwifi router, you should know about your router’s default IP address and default username-password. If you are new to these terms and never used a router, you should read this article carefully. In this article, we will share everything you need to know about the 192.168.0.1 IP address and how you can use it to access your router admin page.

What is 192.168.0.1?

192.168.0.1 is a default login IP address, just like a website URL. 192.168.0.1 IP address is used to access the router admin page to change router WiFiwifi name or WiFiwifi password, etc.

This is the default login IP and is only available to modems or wireless routers. You can access the router’s admin page with 19216801 in your browser. Most of the router manufacturers like D-Link and Netgear use 192.168.0.1 IP as their default IP address to login into the router. This is not the only IP standard for routers. Many IPs can be used to access your router, switches, and modem but 192.168.0.1 and 192.168.1.1 are the most used.

Many people don’t know their router IP address. People realize this when they want to change their WiF password or name or block any website. To change every setting on your router, you have to log in to your router first.

How to Login to Router using 192.168.0.1?

First, you will need to connect your router with your PC or laptop with an ethernet cable or RJ45 cable.

Once the connection is established, you are good to go. Make sure that both the PC and your router are connected and the router is on.

Step 1: Open your favorite browser, and then in the URL bar, type 192.168.0.1 or http://192.168.0.1.

Step 2: Press enter, and it will ask for a username and password. The default username and password will be:

  • username – admin
  • password – admin or password

192.168.0.1 Login

Step 3:  Once you enter the login details, you will be logged in to the router and see the main router page. Here you can see all the required information about your router, including your router WiFi password.

You can also change your router’s name called SSID name. Also, you can change the router default login IP address from 192.168.0.1 to 192.168.X.1, where X can be any number from 1 to 254.

Forgot IP Address Username and Password?

You can find these troubleshooting steps if you don’t know your router’s default username and password.

If you just purchased your router, then no need to worry. The default username and password of your router is printed on the backside of your router.

The problem occurs when you have changed your router username-password, and now you forgot it. In this case, you have to reset your router.

How to Reset Router?

As we mentioned above, if you have replaced your router’s default username and password, you have to reset your router to log in. Follow these steps to reset your router.

Step 1: Remove the connection of your router with your PC.

Step 2: Take a small object like a needle or a paper clip and flip your router. On the backside of your router, where you insert cable and power cable, you will see a small button.

It is a reset button.

Step 3: Press it with the needle and hold it for 20 seconds until all LED lights blink.

Step 4: Then, release the button and wait for some time. It will reset all your settings and changes.

Now you can use the router’s default username and password provided by the manufacturer. Just log in to your router with a 192.168.0.1 IP address and change the password again.

And don’t forget your password and username again.

Conclusion

191.168.0.1 is one of the most used IP address by routers, modems, and switches. We hope now you understand the 19216801 IP address and its importance. If you need any help then comment below. We will help you.

Join the conversation

Your email address will not be published.